Skip to content
dls insights

Methanol: A Look at Owner’s Alternatives for Greening and the Movement of Bulk Cargoes throughout the World

“Clean energy will increasingly become a source of geopolitical competition, we think, benefiting those who can control and access it.”

 Blackrock mid-year Geopolitical Update

Methanol

Methanol has become the most popular alternative fuel for vessels in the global new build orderbook alongside LNG, but its high cost has kept operators from signing up for the fuel in the long term. The industrialization of technology and the commercial development for vessel fueling did not progress as quickly as expected. Owners also take issue with long-term fueling contracts written at prices that fit the prospective building/operating cost of the vessels. Despite this, a reported 46% of vessel owners are still investing in methanol on their vessels.

As investment in methanol increases, the number of owners investing in LNG is now down 25% since 2021. This drop was expected. LNG was a popular short-term solution to meet desired exhaust emissions reductions from a readily obtainable fuel. But as “better, cleaner” fuels become more available, the side emissions of LNG reduce its desirability for total GHG reduction.

The world’s rivers are lined with industries that produce or need the supply of methanol for their products. Maritime Partners’ HYDROGEN ONE is a towboat that moves tank barges on the Mississippi River. This innovative vessel takes methanol and converts it to hydrogen on board. Many of the chemical plants on the river use methanol delivered mostly by barge. It can be available at designated sites to fuel boats powered by similar systems.

An SMM Maritime Industry Report comparing 2021 to 2023 showed the increase in owner’s interest in methanol. Shipyards still preferred LNG and hybrids as that is where their current contracts lie. This is also true of suppliers of the fuels. The interest in methanol has caused the makers of ship engines to develop engines that can dual fuel run with methanol. Their studies are also on high-speed diesels that can be used on tugs and as generators. Reportedly, there will be 300 methanol fueled vessels in operation by 2027.

We can already see the use of methanol increasing globally. The Dutch company, OCI Global, has been purchased by the Canadian Methanex , which includes two methanol plants in Beaumont, Texas. Trinidad and Tobago, located near shipping routes through the Caribbean, has started fueling several tankers with a 20% green and 80% conventional fuel methanol blend.

Global transport of green hydrogen, Adobe Stock image

Keep in mind, for methanol to be the cleanest by the well-to-wake measurement, it should be produced through renewable feedstocks, such as agricultural, industrial, or municipal waste and through renewable electricity for the desired Green Methanol. As clean as it can be with the proper e-methanol process, I have previously mentioned its problem with safe storage and its low power density. For at least the next five years, fuel producers will continue to make alternative fuels greener, and users will continue to make its on board use safer, and of course, less expensive.

However, building new ships is extremely expensive. It is not only the cost of all that goes into the new construction, but the fact that the surge of new orders in many fields has overwhelmed available shipyards. There is no room for hard price negotiations.

Owner’s Alternatives

Owners of vessels that need to improve their GHG emission statistics under IMO regulations have more readily, and more economically, moved to other routes.

I find it amazing that the propeller has had the most advances and changes. Propellor ducts, pre-swirl stators, rudder bulbs, and other energy saving devices are in use or on order for over 11,000 vessels. Fuel handling systems for dual fuels and waste heat recovery systems are in use or on order for 320 vessels as these are still a new field.

Deck mounted wind assist outfitting, such as Flettner rotors, suction wings, kites, and rigid sails, are on more than 100 vessels. Such systems are expensive but quicker to install—reducing downtime. There are additional hull factors that may cost more and require longer installation times. Well known bow designs, such as the Ulstein X-Bow and the Damen Sea Axe, can increase efficiency. Air lubrication systems have also been growing in popularity, as are hull fins, including a whale like flipper, and Elogrid, which is a system to efficiently operate any side thrusters. Adding up all the vessels in use or being built, there are over 3700 vessels using one or more of these changes, most with efficient bow designs.

These design variations have been a factor in ship design and retrofitting since around 2000 and will be more common in this decade. A ship may now have two or three of these along with dual or single alternate fuel engines, all to best meet the IMO CII standards, often just for their trade route. Once sales start clarifying, the market owners, lenders, underwriters, and appraisers should see which CII grades support a favorable value of that ship type. There will also be the factor of the cost of maintenance of some of these advancements. While a ship with a good CII grade will be popular with users and helpful with getting good charters, an owner is still faced with the risk of their income not exceeding expenses.

Maritime Dry and Liquid Bulk Sectors

Right now, the dry bulk sector is very strong and thriving on high rates. These are the large ships carrying coal, iron ore, and bauxite for the needs of China. Tonne mileage is higher because of current necessary diversions due to political situations and port congestion in loading and discharge ports. Areas producing steel may be changing in the future to areas that have green renewable power that will draw the construction of efficient and cleaner steel mills.

A group caught in the squeeze are the smaller sub-Panamax vessels, which are carriers of most of the world’s cargo, raw and semi-finished materials. These dry bulk carriers comprise 63% of the dry bulk fleet and are operated by most of the small vessel owners or operators. These owners may want to comply, but this can raise their operational costs without a benefit to their balance sheet. Also, the required energy transition between 2030-2050 is projected to cause a decline in the need for the carbon intensive cargo types that are the base of the income of many of these operators.

Bulk carriers with coal, Adobe Stock image

Currently, owners and operators have no incentives to build new ships because of the high level of utilization providing excellent profits for a fleet of the current size. Simple supply and demand. There is difficulty in finding available builders at reasonable cost which keeps these owners away from new construction and added debt. Shipyards are booked out as much as four years ahead with the construction of container ships, LNG/Ammonia/Methanol ships, and product tankers. Producers and trading houses of bulk cargoes are under pressure to control emissions, but understandably, they feel these added costs should fall on the vessel, and not add to their cargo shipping costs.

The international coal demand is still good. Part of that is China’s demand of coal to produce electricity to make the electric cars that they are pushing on their population. China has the world’s largest program to move to renewable power, particularly via windfarms, but that will take more years to succeed. The political situation affecting tonne miles is also good for carrying coal. However, executives in this area of marine shipping and other commodity experts believe the need for coal will peak in the early 2030s.

Hybrid, electric, and hydrogen fuel cell innovations, Adobe Stock image

Large bulk carrier owners state that after their building boom between 2000 – 2011, the fleet is easing into their 20-year age. It is interesting that the owners of tankers are looking at a similar situation. They do not want to get into the high costs of new construction and believe that it will be possible to have users move from the 15-year desired charterer age limit to twenty years or higher. They are also wary of new construction contracts at this time due to a weakening demand for crude oil as the move to alternate fuels grow and because of world geopolitics and “operational complexity” that may occur depending on the outcome of the U.S. presidential election in November.


Increasing costs and regulations are making a worldwide impact, particularly on small vessel operators. Domestically speaking, a small family size operator of tugs, pushboats, and oilfield vessels may have financial problems complying with the load of new regulations, tired of the treadmill or unable to keep up with the changes in domestic and international commerce.

As seen in the charts above, newbuild orders for tankers and bulk carriers are rare, while shipyards are deeply stocked with orders for containerships and gas carriers. And there is a projection that container rates will go into a fall running into 2025 due to a projected easing of demand assisted by an over-built container fleet.  

 

There is a clear effort by owners and operators in the shipping sector to meet emissions requirements, from transitioning to alternative fuels, such as methane, to rethinking ship design elements for green optimization. This all while facing higher construction and labor costs while potentially decreasing profit margins.  

 

As said by King Mongkut of Siam (or was it Rodgers and Hammerstein?) “tis a puzzlement”.

-Norman Laskay

 If you’d like to keep this conversation going, please email me at nlaskay@DLSmarine.com

Follow Us for more like this:

Additional articles

IT’S ALL UP IN THE AIR

The technical areas of maritime shipping increase rapidly with multiple ways of reducing emissions from dual-fuel engines and wind assistance and to computerized control of engines, wind assistance, and route planning. With these increasing technical advances, the certification and ongoing inspections of the systems grow more difficult. Technical advancements are also being made for vessel inspections. One of the fastest growing in all forms of vessel inspections is the use of drones.

Read More »

Flotsam & Jetsam – A Look at Maritime Sections

With new GHG emissions regulations and corporate ESG concerns, designs and outfitting are now changing faster than they have over the previous 80 years. The propulsion and hull design of a ship in 2030 will be strikingly different, even than that of a peer ship built by 2020.

Read More »

Get A Quote

The Fastest Way To Get Your Project Started

DLS Marine Valuation Logo
Mondi Semsar - DLS Marin

Mondi Semsar

Hull, Machinery, & Digital Surveyor

Areas of Expertise:

  • Bulk Commodity Management
  • Digital Surveying Techniques
  • Quality Control and Safety Compliance
  • Operational Efficiency Optimization

Education:

  • CFR Part 107
  • AS in Accounting
  • AS in PTEC (Oil Processing and Operations)
  • AA in Allied Health
  • NASM CNC (Certified Nutrition Coach)
  • NASM BCS (Behavior Change Specialist)

Background:

Mondi Semsar joined the firm in 2024, bringing over a decade of expertise in bulk commodity management, operational efficiency, USDA grade standards for grain inspection, and quality control. Prior to this, he worked as a Surveyor and Bulk Commodity Supervisor at Russell Marine Group and served as a Manager and Instructor in the health and wellness industry. With specialized knowledge in large-scale grain operations and regulatory compliance, both domestically and internationally, Mondi applies a holistic, disciplined approach to every project, prioritizing precision, safety, and client engagement.

msemsar@dlsmarine.com
Anthony J. “Tony” Anselmi - Hull & Machinery Surveyor - DLS Marine

Anthony J. “Tony” Anselmi

Hull & Machinery Surveyor

Areas of Expertise:

  • Hull and Machinery
  • Damage Surveys
  • Condition Surveys
  • Trip in Tow/Trip Under Own Power Suitability Surveys
  • On/Off Charter Surveys

Education:

  • B.A. – Political Science – Nicholls State University
  • NAMS Certified Marine Surveyor
  • USPAP and ME 201 – American Society of Appraisers

Background:

Anthony started his maritime career on shrimp trawling vessel working with his grandfather at the age 15. While studying at Nicholls State University, Anthony worked for Danos & Curole during the summers and breaks as a rigger/roustabout working at shoreside facilities between Galliano and Port Fourchon, Louisiana. Anthony joined DLS in May 2024. Anthony brings seventeen years of marine surveying experience working on a variety of inland and offshore vessels/barges and is a Certified Marine Surveyor with the National Association of Marine Surveyors. Anthony is based in Louisiana and accepts assignments in hull and machinery damage surveys, condition surveys for financial, insurance and pre-purchase purposes, on/off hire surveys, trip in tow/trip under own power surveys, damage claims review, and salvage monitoring.
tanselmi@dlsmarine.com
Matt McDaniel DLS Marine Survey and Appraisal

Matt McDaniel

Hull & Machinery Surveyor

Areas of Expertise:

  • Hull and Machinery
  • Damage Assessment and Repairs
  • Condition
  • Inspections
  • Project Management

Memberships / Professional Certification:

  • NAMS-CMS

Background:

Matt began marine surveying in 2014 and has experience with damage causation, reviewing transit plans, new construction, cargo transfers, salvage operations, on/off charters, and general condition surveys. He joined the Hull & Machinery department at DLS in 2019.

mmcdaniel@dlsmarine.com
Charles Sterling - DLS - UAV Supervisor | Digital Inspection Manager

Charles Sterling

UAV Supervisor | Digital Inspection Manager

Areas of Expertise:

  • Uncrewed Aerial Vehicles & ROV’s
  • Digital Inspections
  • Computer Technology

Professional Certifications:

  • AS, Computer Information Systems
  • BS, Information Technology
  • FLIR Infrared Training Institute

Certified Specialist in Caterpillar diesel engines to include:

  • CFR Part 107
  • Level 1 sUAS Thermographer
  • Microsoft Certified System Engineer

Background:

Charles joined the firm in 2024, after managing an enterprise drone service provider based in New Orleans. He also teaches basic and advanced UAV class at Delgado Community College. Charles has extensive experience planning, flying complex missions in the Industrial, Chemical and Oil & Gas industries.

csterling@dlsmarine.com

Ave P. Boudreaux

Marine Surveyor

Areas of Expertise:

  • Hull and Machinery
  • Project Management Supervisor (QC) – overseen numerous construction and delivery schedules for vessels
  • Extensive knowledge of U.S. Coast Guard and ABS rules and regulations for vessel construction and repair

Education:

  • Rolls-Royce Z-Drive Failure Analysis Seminar
  • Flex-Core and Aluminum Welding Course
  • Extensive training in engine, gear, and shaft alignment
  • Extensive training in vessel repair and new construction

Memberships / Professional Certification:

  • NAMS-CMS

Background:

Mr. Boudreaux has 15 years experience with offshore supply vessels, crewboats, and anchor handling tugs. During this time, he served 8 years in vessel repair and new construction, 3 years in vessel operation and logistics, and 4 years as a vessel port captain.

Mr. Boudreaux served over 3 years as a marine surveyor performing numerous types of surveys in the marine industry prior to joining DLS.

 aboudreaux@dlsmarine.com

Norm Laskay - DLS Marine Valuation

Norman F. Laskay

Of Counsel

Mr. Laskay joined Stickney, Dufour & Associates, Inc. in 1988 as a partner. He is now of Counsel. He became a Marine Surveyor in 1974, having gained prior experience in steamship agency, bulk cargo handling and vessel operations. He has been involved in many aspects of marine surveying including hull, machinery and cargo, both inland and ocean. Since becoming an Accredited Senior Appraiser of commercial marine equipment, he has been active with the American Society of Appraisers’ International Machinery and Technical Specialties Committee. He has written a comprehensive exam for the Commercial Marine Appraisal specialty and has written a 30-hour course for the American Society of Appraisers on appraising commercial marine vessels and yachts and is the lead instructor.

Areas of Expertise:

  • Commercial Marine Appraisal
  • Hull Damage and Repair
  • Cargo Loading, Securing and Trip in Tow Preparation

Education:

  • Maine Maritime Academy Graduate
    B.S. in Marine Transportation
  • Continuing education credits in Law, Appraisal, Marine Survey, and Diesel Repair.

Professional Certification/Memberships:

  • NAMS Regional Board of Directors Member 1989-1994
  • American Society of Appraisers – Chapter Treasurer 1991-1994
  • American Society of Appraisers – Chapter President 1994-1995
  • Mark Twain Club (Charter Member)
  • Machinery and Technical Specialties International Committee 1995-Present

Publications

  • The Journal of the International Machinery & Technical Specialties Committee of the American Society of Appraisers “TUGBOAT DESIGN 101” Vol 13 No. 2 Fall 1996
  • The Journal of the International Machinery & Technical Specialties Committee of the American Society of Appraisers “KEEPING AN EYE ON YOUR MARINE ASSET” Vol 13 No. 3 Winter 1996
  • Marine Money, The Ship Finance Publication of Record “ASSET BASED APPRAISAL:, Vol. 21, No. 3, May/June 2006 Wrote the chapter on Marine Asset Appraisal for the American Society of Appraisers text book: “VALUING MACHINERY AND EQUIPMENT: THE FUNDAMENTALS OF APPRAISING MACHINERY AND TECHNICAL ASSETS” Second Edition. In 2008, revised the chapter for the future Third Edition and wrote an accompanying Work Book section.

Email: nlaskay@dlsmarine.com

  

Harry Ward President DLS Marine

Harry Ward

President

Harry Ward is the President of Dufour, Laskay & Strouse, Inc. Harry is a US Navy veteran and has spent much of the past decade in the maritime industry in sales, finance and general management. He has extensive experience in asset and business valuation and is working to maintain DLS leadership in marine appraisal and survey for another 50 years. Harry is a graduate of the US Naval Academy and served as a helicopter pilot and survival instructor through multiple tours of duty. He has an MBA from San Diego State University.

Areas of Expertise:

  • Fleet and Vessel Appraisals
  • Marine Business Valuation
  • Transaction Support – Due Diligence
  • Transaction Support – Marine M&A Advisory
  • Digital Inspection – Marine and Offshore Wind

Education:

  • U. S. Naval Academy, Annapolis, MD – 1991, Bachelor of Science
  • San Diego State University, San Diego, CA – 1999, MBA with emphasis in Finance

Licenses and Professional Associations

  • FINRA Licenses, Series 63 and 79 (Investment Banking)
  • American Society of Appraisers, AM
  • Certified Exit Planning Advisor, CEPA (Business value assessment and strategy development